Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/msscom/41/en/Readme/DellMPv41_CMC_Readme.txt[10/23/2012 10:16:15 AM]
- Windows Server 2003 R2 SP2, Enterprise x64 Edition
- Windows Server 2003 R2 SP2, Datacenter x86 Edition
- Windows Server 2003 R2 SP2, Datacenter x64 Edition
- Windows Server 2008, Standard x86 Edition
- Windows Server 2008, Standard x64 Edition
- Windows Server 2008, Enterprise x86 Edition
- Windows Server 2008, Enterprise x64 Edition
- Windows Server 2008, Datacenter x86 Edition
- Windows Server 2008, Datacenter x64 Edition
- Windows Server 2008 SP2, Standard x86 Edition
- Windows Server 2008 SP2, Standard x64 Edition
- Windows Server 2008 SP2, Enterprise x86 Edition
- Windows Server 2008 SP2, Enterprise x64 Edition
- Windows Server 2008 SP2, Datacenter x86 Edition
- Windows Server 2008 SP2, Datacenter x64 Edition
- Windows Server 2008 R2, Standard x64 Edition
- Windows Server 2008 R2, Enterprise x64 Edition
- Windows Server 2008 R2, Datacenter x64 Edition
#####################################################################
Supported Firmware Versions for CMC and DRAC/MC Devices
#####################################################################
List of firmware versions supported for CMC and DRAC/MC devices:
- CMC : 2.1, 2.2, 2.3, 3.0
- DRAC/MC : 1.5, 1.6
#####################################################################
USER NOTES
#####################################################################
* Dell Chassis Modular Server Correlation utility can be imported only in
System Center Operations Manager 2007 R2.
* If the DRAC Console launch displays a "Page cannot be displayed"
error, ensure that there is network connectivity from the device
(DRAC/MC, CMC card), and that the device is configured with a valid
IP address.
* The Discovery Rule "Dell CMC Slot Discovery" is disabled for all Dell
Chassis Management Controllers in the Dell Chassis Management Controller
Management Pack. Enable this rule to discover server modules and free
slots for Dell Chassis Management Controllers after you have created
Run As Accounts for the CMC devices in your network and associated
them with the "Dell CMC Login Account". For more information on
configuring Run As Accounts refer to "Dell Server
Management Pack Suite Version 4.1 For Microsoft System Center
Operations Manager 2007 SP1/R2 and System Center Essentials 2007
SP1/2010 User’s Guide"
Note:- A user can enable the "Dell CMC Slot Discovery" Discovery if
required by using overrides in a custom Management Pack.