User's Manual

44 Understanding Dell Server Management Pack Suite Operations
Turn LED Identification On
Turns on the Identify LED of the selected system for 255 seconds. You can
use this task to turn on the LED identification on the system.
1
In the Operations Console, navigate to a Dell diagram view.
2 Expand and select the desired Dell system.
3 In the Actions pane, select Dell Windows Server Tasks → Tu rn LED
Identification On.
Dell Remote Access Controller (DRAC) Tasks
DRAC 4/ DRAC 5/ iDRAC 6
You can use this task to launch the Dell Remote Access Console, if the DRAC
is installed on your Dell system.
1
In the Operations Console, navigate to a Dell diagram view, state view,
or alert view.
2 Expand and select the desired DRAC system
3 In the Actions pane, select SNMP Network Device Tasks → Launch Dell
RemoteAccess Console.
Dell Chassis Management Controller (CMC) Tasks
CMC
You can use this task to launch the CMC Console.
1
In the Operations Console, navigate to the Dell Diagram view, State view
or Alert view.
2 Select the CMC device.
3 In the Actions pane, select SNMP Network Device Tasks → Launch Dell
CMC Console
.
DRAC/MC
You can use this task to launch the DRAC/MC Console.
1
In the Operations Console, navigate to the Dell Diagram view, State view
or Alert view.
2 Select the DRAC/MC device.