Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/msscom/40/en/readme/DellMPv40_Server_Readme.txt[10/19/2012 1:39:51 PM]

Management utility (BMU) 2.0 or later should be installed on the

SCOM management server. BMC tasks use default credentials including

the default BMC install path (c:\program Files\Dell\SysMgt\bmc).

For IPMI Shell errors, see the "Dell OpenManage Baseboard Management

Utilities User's Guide" from the "Dell Systems Management Tools and

Documentation DVD" or from the Dell Support website at

"support.dell.com".

* To run the Remote Power Control tasks or the LED Identification

Control tasks on managed systems, the BMC Management Utility

version 2.0 or later must be installed on the management station.

Please note that BMC Management utility (BMU) 2.0 or later should be

installed on SCOM management server in order to carry out the remote

power control tasks. BMC tasks use default credentials including the

default BMC install path (c:\program Files\Dell\SysMgt\bmc).

In OM 5.3 to 6.1 the BMU is included on the "Dell Systems Management

Tools and Documentation DVD".

* If the DRAC Console launch gives you a "Page cannot be displayed"

error, ensure that there is network connectivity from the device

(DRAC/iDRAC card), and that the device is configured with a valid

IP address.

* If attributes or hardware objects do not display for Dell systems,

ensure that the CIM Dell namespace is not corrupted and that the Dell

Services are not down. Restart the Dell managed system or reinstall

Server Administrator to correct the CIM behavior.

* Remote Power control tasks, LED Identification control tasks, and

Clear Agent ESM Log will function only for Dell systems on which a

Dell Agent is installed.

NOTE: The Operations Manager 2007 SP1 Management Server Action

account needs administrator privileges on all Dell managed

systems to perform DRAC in-band object discovery and launch the

Dell Remote Access Console task. If the Management Server

Action account has normal user privileges, operators need to

provide task credentials with Power User (or higher) privileges

to run the Clear ESM Logs task, instead of selecting 'Use the

predefined Run as Account'.

#####################################################################

KNOWN ISSUES

#####################################################################

- The server attribute "Life Cycle Controller size" is always listed

as 'Not available'.(DF304827)

#####################################################################

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission