Users Guide

Rules

The following section lists the rules specific to the Dell Chassis monitoring feature.

Dell Systems Event Processing Rules

The Dell Server Management Pack Suite processes rules from Chassis traps.

Chassis devices

All informational, warning, and critical SNMP traps for the chassis devices have a corresponding SNMP trap rule.

Each of these rules are processed based on the following criteria:

• Source Name = "DRAC/CMC name or IP"

• OID = Actual trap ID of the DRAC/CMC SNMP trap event

• Data Provider = SNMP trap

NOTE: Informational alerts are turned off by default. To receive these alerts, import informational alerts management

pack.

Tasks

Tasks are available in the Tasks pane of the OpsMgr console. When you select a device or a component, the relevant tasks appear

in the Tasks pane.

Task Summary

Performing Dell Task using the Dell Chassis

Following table provides a summary of the Dell task that you can perform using the Dell chassis:

Table 29. Dell Task using The Dell Chassis.

Task Description

Launch Dell CMC Console Launches the CMC console.

Dell Chassis Tasks

Launch Dell CMC Console

To launch the CMC console.

1. In the OpsMgr console, navigate to Dell Diagram Views, State Views, or Alerts Views.

2. Select the CMC device in any of the Diagram Views or State Views or an alert in the Alerts Views.

3. In the Tasks pane, select Dell CMC Tasks → Launch Dell CMC Console.