Install Guide

Chassis Monitoring Feature

The Chassis monitoring feature supports discovery and monitoring of Chassis Management Controller (CMC) on Dell PowerEdge

FX2/FX2s chassis, Dell PowerEdge VRTX chassis, Dell PowerEdge M1000e chassis, and Dell OEM Ready chassis using SNMP or

WS-MAN protocol.

Chassis monitoring feature also supports Detailed monitoring of individual chassis components in the supported OpsMgr.

Management Packs

After the Dell Server Management Pack Suite management packs are successfully imported, the following management packs

should appear in the Administration pane of the OpsMgr console. For more information, see Importing the Dell Server Management

Packs into OpsMgr.

The following table lists the required management packs for the chassis monitoring feature.

Table 15. Required Management Packs

Feature Default Location of Management

Packs

Required Management Packs

Chassis Monitoring

Library

C:\Program Files\Dell Management

Packs\Server Mgmt Suite

\6.3\Library

Scalable and Detailed

Management Packs

C:\Program Files\Dell Management

Packs\Server Mgmt Suite

\6.3\Chassis Monitoring

Library

• Dell.Connections.HardwareLibrary.mp

• Dell.OperationsLibrary.Common.mp

Scalable Feature

• Dell.CMC.OM07.mp — OpsMgr 2007 R2

• Dell.CMC.OM12.mp — OpsMgr 2012

• Dell.Model.Server.mp

• Dell.OperationsLibrary.CMC.mp

• Dell.View.CMC.mp

Detailed Feature

• Dell.Chassis.Detailed.mp and all scalable

management packs.

Configuration prerequisites

• Ensure that SNMP ports on firewall are enabled.

• Ensure that Dell Device Helper is installed.

• Ensure that there is WS-MAN (WS-Management) connectivity between the Management Server and the Managed Node.

Chassis Monitoring requirements

• For slot discovery and correlation to work; ensure that you have Dell Device Helper utility installed.