Users Guide

Figure 4. Chassis Management Controllers group diagram
For discovered CMC chassis, you can view the occupied and free slot summary in the Chassis Slots
Summary.
Slot names modified on CMC chassis are reflected in the diagram view.
The correlation of Dell servers with the server modules of CMC chassis are displayed in the Chassis
Management Controllers Group diagram. The Dell system is visible under the slot in the diagram.
NOTE: Create Run As Account for CMC slots discovery with simple, basic, or digest authentication
only. For more information, see "Configuring the Dell Chassis Management Controller Feature for
Correlating Server Modules with Chassis Slot Summary" section of the
Dell Server Management
Pack Suite Version 6.1 for Microsoft System Center Operations Manager Installation Guide at
dell.com/support/home.
NOTE: The iDRAC firmware of the modular systems should be compatible with the CMC firmware,
failing which, the Service Tag is displayed as Not Available and the Chassis Blade Correlation may
not be possible.
Dell Chassis Diagram Views
The Dell Chassis diagram view offers a graphical representation of Dell PowerEdge FX2, Dell PowerEdge
M1000e chassis, and Dell PowerEdge VRTX chassis devices. Select a component in the diagram to view
its details in the Detail View pane.
State Views
This view is available for viewing the health of the Dell CMC devices. In the OpsMgr console, click Dell →
State Views, the status of each Dell device managed by OpsMgr on the network is displayed.
Select the Dell CMC device group for which you want to see the State view. You can view the status of
the CMC device group.
61