Users Guide

• Peak Power (Watts)

• Physical Network Interface

• Power Consumption (BTU/hr)

• Power Consumption (Watts)

• Teamed Network Interface

NOTE:

• When the Detailed edition of the Agent-based monitoring feature is imported, the disabled

Performance (excluding Network Performance) and Agent-based Disk Performance (%)

collection rules are enabled by default.

• Agent-based Disk Performance (%) — This view displays the Remaining Rated Write Endurance

of Solid-State Drives (SSDs) of a Dell server (Agent-based). Search for the object SSD to view the

data.

NOTE: Network Statistics are defined in Detailed edition of Agent-based monitoring feature only

and are disabled by default. To enable the feature, see

Enabling Performance Collection Rules.

Enabling Performance Collection Rules

To enable this feature:

1. Launch OpsMgr console and click Authoring.

2. Click Rules and search for performance collection rules.

3. Right-click the rule you want to enable.

For example, to collect information on Network Interface of all Dell systems, perform step 4 to step 5

for the rules listed below:

• Total Transmitted Packets

• Received Bytes

• Total Received Packets

• Transmitted Bytes

4. Select Overrides → Override the Rule → For all objects of class.

5. Select Override and provide Override value as True.

6. Click Apply.

Tasks

Tasks are available in the Tasks pane of the OpsMgr console. When you select a device or a component,

the relevant tasks appear in the Tasks pane.

Task Summary

Performing Dell Tasks

Following table provides a summary of the Dell tasks that you can perform on the OpsMgr: