Users Guide

The Specify the Run As profile's general properties screen is displayed.
5. Click Next.
The Run As accounts screen is displayed.
6. Click Add.
The Add a Run As account screen is displayed.
7. Select the run as account used to discover the Dell server from the Run As account drop-down list.
NOTE: If you are using multiple Run As accounts to discover devices, associate each device with its associated Run As
account.
8. Click A selected class, group, or object and add the association for the server in the SMASH Monitoring Profile.
● Click Select > Class option, use Dell server as the selection.
● Click Select > Group option, use the group containing the Dell server objects as the selection.
● Click Select > Object option, use the individual Dell server object as the selection.
9. Click OK.
10. Click Save and Close.
Next steps
NOTE: If the Run As Account association is not done, the alert Dell OM: Server and its component health computation
failed is displayed under Monitoring > Alerts View > Server Alerts on the console.
Severity Level Indicators
The following table lists the icons that indicate the severity levels of the discovered Dell devices on the OpsMgr console.
Table 30. Severity Level Indicators
Icon Severity Level
Normal/OK — The component is working as expected.
Warning/Noncritical — A probe or other monitoring device has detected a reading for the component
that is above or below the acceptable level. The component may still be functioning, but it could fail.
The component may also be functioning in an impaired state.
Critical/Failure/Error — The component has either failed or failure is imminent. The component
requires immediate attention and may need to be replaced. Data loss may have occurred.
The health status is not applicable for the specific component.
The service is unavailable.
Associate Run As-Account task — Agent-free
Monitoring Feature
Associate Run As-Account task associates the Run As Account used for SMASH discovery with all Dell Server objects, required
for health monitoring. This task is available as an option for performing object-level association.
WARNING:
Perform the Associate Run As-Account task only if necessary. This task affects the configuration of
all Dell Server objects. Dell Server Run As Account Association unit monitor automatically performs the object-
level association.
68 Appendix B