Users Guide

● Peak Power (Watts)
● Physical Network Interface
● Power Consumption (BTU/hr)
● Power Consumption (Watts)
● Teamed Network Interface
NOTE:
● When the Detailed edition of the Agent-based monitoring feature is imported, the disabled Performance (excluding
Network Performance) and Agent-based Disk Performance (%) collection rules are enabled by default.
● Agent-based Disk Performance (%) — This view displays the Remaining Rated Write Endurance of Solid-State
Drives (SSDs) of a Dell server (Agent-based). Search for the object SSD to view the data.
NOTE: Network Statistics are defined in Detailed edition of Agent-based monitoring feature only and are disabled by
default. To enable the feature, see Enabling Performance Collection Rules.
Enabling Performance Collection Rules
About this task
To enable this feature:
Steps
1. Launch OpsMgr console and click Authoring.
2. Click Rules and search for performance collection rules.
3. Right-click the rule you want to enable.
For example, to collect information on Network Interface of all Dell systems, perform step 4 to step 5 for the rules listed
below:
● Total Transmitted Packets
● Received Bytes
● Total Received Packets
● Transmitted Bytes
4. Select Overrides > Override the Rule > For all objects of class.
5. Select Override and provide Override value as True.
6. Click Apply.
Tasks
Tasks are available in the Tasks pane of the OpsMgr console. When you select a device or a component, the relevant tasks
appear in the Tasks pane.
Task Summary
Performing Dell Tasks
Following table provides a summary of the Dell tasks that you can perform on the OpsMgr:
Table 9. Dell Tasks
Task Description
Launch Dell OpenManage Server Administrator Launches the Dell OpenManage Server Administrator.
Launch Dell OpenManage Power Center Launches the Dell OpenManage Power Center console on the
Management Server.
22 Agent-based Monitoring Feature