Users Guide
7. For power control tasks, in the Parameters field, type the command line parameters in the following
format:
• Type -I lan -H and then choose the Remote Access IP with IPMI capability from the drop-
down menu.
• Type -U <username> -P <password> -k <kgkey> <IPMI Task String>
• Replace <IPMI Task String> with one of the following options:
– power status (for Check Power Status task)
– power on (for Power On task)
– power soft (for Power Off Gracefully task)
– power off (for Force Power Off task)
– power cycle (for Power Cycle task)
– power reset (for Power Reset task)
– identify on (for LED Identification On task)
– identify off (for LED Identification Off task)
Example:
-I lan -H $Target/Property[Type="Dell.WindowsServer.Server"]/RemoteAccessIP$
-U root -P <password> -k <kgkey> power status
8. For LED on or off tasks, type the command line parameters in the following format:
• Type -ip and choose the Remote Access IP with IPMI capability from drop-down menu.
• Type -u <username> -p <password> -k <kgkey> <IPMI task string>.
9. Click Create to create the task and repeat this procedure for each new BMC task.
Creating A Launch License Manager Task
Launch License Manager Task uses the default Dell License Manager (DLM) install path
(%PROGRAMFILES(X86)%\Dell\SysMgt\LicenseManager\Dell.DlmUI.exe or %PROGRAMFILES%\Dell
\SysMgt\LicenseManager\Dell.DlmUI.exe), that cannot be modified.
If your systems deviate from this, install DLM on the management server and create new console tasks in
the Authoring pane targeted on DLM for Dell Server.
To create a new task:
1. Launch OpsMgr console and click Authoring.
2. In the Authoring pane, right-click Tasks under Management Pack Objects, and select Create new
task.
3. In the Task Type screen, select Command line under Console Tasks.
4. Select the destination management pack and click Next.
5. Type Task name, Description, and set the Task Target with one of the following:
• Dell Windows Server (for Dell Server In-band Monitoring)
• Dell Server (for Dell Server Out-of-band Monitoring)
• Dell iDRAC7 (for DRAC Monitoring)
6. Click Next.
The Command Line screen is displayed.
82