User's Manual
3. From the list of available profiles, right-click SMASH Device Monitoring Profile and click Properties.
The Introduction screen is displayed.
4. Click Next.
The Specify the Run As profile's general properties screen is displayed.
5. Click Next.
The Run As Accounts screen is displayed.
6. Click Add.
The Add a Run As Account screen is displayed.
7. Select the run as account used to discover the Dell server from the Run As account drop-down list.
NOTE: If you are using multiple Run As Accounts to discover devices, associate each device with its
associated Run As Account.
8. Click A selected class, group, or object and add the association for the server in the SMASH Monitoring Profile.
– Click Select → Class option, use Dell server as the selection.
– Click Select → Group option, use the group containing the Dell server objects as the selection.
– Click Select → Object option, use the individual Dell server object as the selection.
9. Click OK.
10. Click Save and Close.
NOTE: If the Run As Account association is not done, the alert Dell OM: Server and its component health
computation failed is displayed under Monitoring → Alerts View → Server Alerts on the console.
Discovering Chassis Devices
The Chassis devices should be discovered in the Agent Managed view under the Administration section of the OpsMgr
console.
To discover Chassis devices:
1. Log on to the management server as an OpsMgr administrator.
2. On the OpsMgr console, click Administration.
3. At the bottom of the navigation pane, click Discovery Wizard.
4. Run the Discovery Wizard, select Network devices and follow the instructions on the screen.
For more information, see the OpsMgr documentation at technet.microsoft.com.
NOTE: Select the Run As accounts created for discovering the Chassis devices. For more information, see the
"Configuring Dell Chassis Management Controller Feature For Correlating Server Modules With Chassis Slot
Summary" section of the
Dell Server Management Pack Suite Version 5.1 For Microsoft System Center
Operations Manager And System Center Essentials Installation Guide
at dell.com/support/manuals.
5. On the Add a Device console screen in OpsMgr 2012, type the IP address that you want to scan, select the
appropriate Run As account from the SNMP V1 or V2 Run As account drop-down box.
6. Enable the Chassis Monitoring feature through Feature Management Dashboard.
18