User's Manual
4. Select Manually define additional variables to set additional variables on the system. To define the additional
variables:
a) Type a variable Name.
b) Type the variable Value.
c) Select the variable Type from the drop-down menu.
5. Click Apply and OK.
Log/Return Files
To retrieve the log files or capture configuration files:
1. Select Retrieve the task sequence log file from the client after this action runs.
2. Select Enable extended / debug logging by this action to get extensive information in the log files.
3. Select Retain network folder settings from a prior step, if available to copy any available network folder settings
from the previous step or to configure the network folder settings proceed to step 4.
4. Provide a valid network/local path to save the file.
5. Provide the domain and account name to access the path.
6. Provide and confirm the password.
7. If you have specified a network path on step 4, then select Map a drive letter to the network share above and then
select a drive letter from the drop-down menu.
8. Click Apply and OK.
Configuring the Task Sequence Steps to Apply Operating System
Image And Driver Package
The scope of this document includes information only on the Dell Server Deployment Pack feature to apply operating
system image and add Dell drivers.
Applying the Operating System Image
NOTE: Before you begin this task, make sure that you have the required operating system image file (.wim file)
within the Operating System Images tree in the Configuration Manager.
To apply the operating system image:
1. From the left-hand side of the Task Sequence Editor, under Deploy Operating System, click Apply Operating System
Image.
2. Select from the following options:
– Apply operating system from a captured image
– Apply operating system from an original installation source
3. Browse and select the operating system location and click OK.
Adding Dell Driver Packages
To add Dell driver packages:
1. From the left-hand side of the Task Sequence Editor, under Deploy Operating System, click Apply Driver Package.
2. Click Browse.
The Select a Package window is displayed.
24