Owner's Manual

Upgrading With the Retain Dell Deployment ToolKit DTK Utilities and Windows PE Drivers Option
1. Open a Command Prompt window.
2. Type the following command to upgrade DSDP with the Retain Dell Deployment ToolKit (DTK) Utilities and Windows
PE Drivers
option.
"<name of the executable file>" > /s /v"/L*v \"a.log\" /qn"
or
"<name of the executable file>" /s /v" CP_WINPESTATE="RetainWinPE" /L*v
\"a.log\" /qn"
NOTE: Boot-images created using previous versions of DSDP will not be retained when upgrading through
command line interface.
For Example:
"Dell_Server_Deployment_Pack_2.1_for_Configuration_Manager.exe" /s /v"
CP_WINPESTATE="RetainWinPE" /L*v \"a.log\" /qn"
Upgrading With the Remove Dell Deployment ToolKit DTK Utilities and Windows PE Drivers Option
1. Open a Command Prompt window.
2. Type the following command to upgrade DSDP with the Remove Dell Deployment ToolKit (DTK) Utilities and
Windows PE Drivers
Option.
"<name of the executable file>" CP_WINPESTATE="RemoveWinPE" /qn /L*v <log
file name>
For Example:
"Dell_Server_Deployment_Pack_2.1_for_Configuration_Manager.exe"
CP_WINPESTATE="RemoveWinPE" /qn /L*v a.log
Working With the Configuration Manager Admin Console
The Configuration Manager Admin Console supports the installation, uninstallation, and upgrade of Dell Server
Deployment Pack and deployment of tasks such as, creating task sequences and creating Dell server driver packages.
NOTE: Make sure that the versions of Dell Server Deployment Pack are the same on Configuration Manager Site
Server and Configuration Manager Admin Console.
NOTE: All procedures mentioned in the document like installing, uninstalling and so on for Configuration Manager
Site Server are applicable to Configuration Manager Admin Console.
Other Dell Documents You Might Need
In addition to this guide and the online help, you might need to refer the following documents to get details on specific
Dell OpenManage products. These documents are available at dell.com/support/manuals.
• The Dell Server Deployment Pack Version 2.1 for Microsoft System Center Configuration Manager User’s Guide
provides information on using DSDP 2.1 on your system.
• The Dell Remote Access Controller 5 Firmware User's Guide provides comprehensive information about using the
RACADM command line utility to configure a DRAC 5.
• The Dell Chassis Management Controller User's Guide provides comprehensive information about using the
controller that manages all modules in the chassis containing your Dell server.
• The Integrated Dell Remote Access Controller User's Guide provides information about installation, configuration,
and maintenance of the Integrated Dell Remote Access Controller (iDRAC) on management and managed systems.
12