Owners Manual

Option Suboptions Description

iscsicfg.ini Use the existing iscsicfg.ini file to

configure RAID. See <Edit syscfg.ini>

for a similar example.

RAID Configuration (command line) None Use this option if you want to manually

configure the RAID tokens using the

CLI.

RAC Configuration (DRAC 5) <Create configuration file> See <Create configuration file> to see

how you do it for the BIOS option.

<Import configuration file> See <Import configuration file>for the

BIOS option.

rac5cfg.ini Use the existing rac5cfg.ini file to

configure DRAC 5. See <Edit syscfg.ini>

for a similar example.

NOTE: Use DRAC configuration

(DRAC5) to configure Integrated

Dell Remote Access Controller

(iDRAC) on Dell PowerEdge

xx0x

modular servers.

iDRAC Configuration (iDRAC 6) <Create configuration file> See <Create configuration file> to see

how you do it for the BIOS option.

<Import configuration file> See <Import configuration file> for the

BIOS option.

idrac6cfg.ini Use the existing idrac6cfg.ini file to

configure iDRAC 6. See <Edit

syscfg.ini> for a similar example.

iDRAC Configuration (iDRAC 7) <Create configuration file> See <Create configuration file> to see

how you do it for the BIOS option.

<Import configuration file> See <Import configuration file> for the

BIOS option.

idrac7cfg.ini Use the existing idrac7cfg.ini file to

configure iDRAC 7. See <Edit

syscfg.ini> for a similar example.

Once you finish configuring the system BIOS, RAID, DRAC, and iDRAC, the hardware component sequences is displayed

in the Task Sequence Editor.

Variable Replacement

The Variable Replacement tab allows you to use and configure task variables like:

• System Variables

• Task Sequence Variables

• Machine Variables