Owner's Manual

Overview 9
Specifying a FQDN in Configuration Manager 2012
1 Launch Configuration Manager by clicking Start  All Programs 
Microsoft System Center 2012  Configuration Manager 
Configuration Manager Console . The Configuration Manager Console
screen is displayed.
2 From the left pane of the Configuration Manager console, click
Administration .
3 Expand Site Configuration and click Servers and Site System Roles .
4 Click on your server or site system.
5 On the bottom pane under Site System Roles right-click Site system and
click
Properties .
6 Select the Specify an FQDN for this site system for use on the Internet
check box.
7 In the Internet FQDN field enter the full FQDN.
8 Click Apply and OK .
Installing Dell Server Deployment Pack
Before you proceed, make sure that you are logged in with administrator
privileges on the server where you want to install Dell Server Deployment
Pack.
Installing Dell Server Deployment Pack for the First Time
Use the following steps if you are installing Dell Server Deployment Pack for
the first time:
1
Go to the Dell Support website at support.dell.com   Drivers &
Downloads
.
2 Download the
Dell_Server_Deployment_Pack_v2.0_for_Configuration_Manager_Axx.e
xe
(where xx is the Dell Server Deployment Pack release number.)
3 Run the .exe file and specify a path to extract the contents of the self
extractable zip file, for example,
C:\DSDP . The
Dell_Server_Deployment_Pack__v2.0_for_Configuration_Manager_Axx.
msi
(where xx is the Dell Server Deployment Pack release number) and
book.book Page 9 Tuesday, March 27, 2012 4:51 PM