Owner's Manual

42 Using DSDP on Systems Running Configuration Manager 2007
5 A list of the driver packages for a combination of the servers and operating
systems is displayed. Select the required packages and click
Finish .
A progress bar displays the status of the import. After the import is
complete, the import summary is displayed.
NOTE: Sections involving importing of drivers may take more time without
updating the progress bar.
6 Click Close .
7 To update and manage distribution points for the driver packages you
imported, go to
Driver Packages  Dell PowerEdge Driver Packages
<Dell OpenManage Version>
. The driver packages window is displayed.
8 Right-click each of the newly imported driver packages and perform the
update and manage distribution points operations.
Enabling Command Prompt for Debugging Boot
Images
To enable command prompt to debug boot images:
1
On the left-hand pane, click Operating System Deployment  Boot
Images
.
2 Right-click on the boot image and select Properties .
3 In the Properties window, select Windows PE tab and select Enable
Command Prompt
check box.
4 Click Apply , and proceed with updating and managing the distribution
points. For more information, see Updating and Managing Distribution
Points.
NOTE: To display the debug console during deployment, press F8.
book.book Page 42 Friday, April 13, 2012 9:34 PM