Owner's Manual

Using DSDP on Systems Running Configuration Manager 2012 32
3 Select Retain network folder settings from a prior step, if available to
copy any available network folder settings from the previous step or to
configure the network folder settings proceed to step 4.
4 Provide a valid network/local path to save the file.
5 Provide the Domain and Account name to access the path.
6 Provide and confirm the password.
7 If you have specified a network path on step 4, then select Map a drive
letter to the network share above
and then select a drive letter from the
drop-down menu.
8 Click Apply and OK .
Configuring the Task Sequence Steps to Apply
Operating System Image And Driver Package
The scope of this document includes information only on the Dell Server
Deployment Pack feature to apply operating system image and add Dell
drivers.
Applying Operating System Image
NOTE: Before you begin this task, make sure that you have the required operating
system image file (.wim file) within the Operating System Images tree in
Configuration Manager.
To apply operating system image:
1
From the left-hand side of the Task Se q uence Ed i tor , under Deploy
Operating System
click Apply Operating System Image.
2 You can choose from the following options:
• Apply operating system from a captured image
• Apply operating system from an original installation source
3 Select the appropriate option and browse and select the operating system
location and click
OK .
book.book Page 32 Friday, April 13, 2012 9:34 PM