Owner's Manual

29 Using DSDP on Systems Running Configuration Manager 2012
Creating Task Sequences for RAID, DRAC, and
iDRAC
From the Configuration action type menu you can select the options listed
in Table 3-1 to create task sequences for RAID, DRAC, and iDRAC.
Table 3-1. Options And Suboptions In Configuration Action Type Menu
Option Suboptions Description
RAID Configuration
(.ini file)
5i-raid0.ini Sample file for RAID 0.
5i-raid1.ini Sample file for RAID 1.
5i-raid5.ini Sample file for RAID 5.
raidcfg.ini Use the existing raidcfg.ini file to
configure RAID. See
Edit <syscfg.ini>
for a similar example.
iscsicfg.ini Use the existing iscsicfg.ini file to
configure RAID. See
Edit <syscfg.ini>
for a similar example.
RAID Configuration
(command line)
None Use this option if you want to manually
configure the RAID tokens using the
CLI.
RAC Configuration
(DRAC 5)
<Create
configuration
file>
See <Create configuration file> to see
how you do it for the BIOS option.
<Import
configuration
file>
See
<Import configuration file> for the
BIOS option.
rac5cfg.ini Use the existing rac5cfg.ini file to
configure DRAC 5. See
Edit <syscfg.ini>
for a similar example.
NOTE: Use DRAC configuration (DRAC5)
to configure Integrated Dell Remote
Access Controller (iDRAC) on Dell
PowerEdge xx0x modular servers.
book.book Page 29 Friday, April 13, 2012 9:34 PM