Owner's Manual

21 Using DSDP on Systems Running Configuration Manager 2012
<Create configuration file>
1 Select <Create configuration file> from the Configuration file /
Command line parameters
drop-down menu.
2 Click Create . The Array Builder wizard is displayed. For more information
on the Array Builder see, Using the Array Builder.
3 Enter the configuration rule name in the Configuration Rule Name field.
4 Select the error handling rule from the drop-down menu. You can choose
from:
•
Fail the task if any controller does not match a configuration rule -
reports a failure if a rule cannot configure any of the detected
controllers.
•
Fail the task only if the first controller does not match a
configuration rule
- reports a failure if a rule cannot configure the first
detected controller (usually the embedded controller).
•
Fail the task if none of the array controllers match a configuration
rule
- reports a failure only if all of the controllers in the system fail to
match a rule; in other words, none of the controllers are configured.
<Import configuration file>
1 Select <Import configuration file> from the Configuration file /
Command line parameters
drop-down menu.
Click
Import .
2 Specify the location of the configuration file you want to import and click
Open .
<sample.xml>
1 Select <sample.xml> from the Configuration file / Command line
parameters
drop-down menu.
2 Click View . The Array Builder wizard for the sample.xml is displayed.
3 To edit the sample.xml , see <Create configuration file> .
book.book Page 21 Friday, April 13, 2012 9:34 PM