Owner's Manual

34 Using The Dell Deployment Pack
Once you finish configuring your system BIOS, RAID, BMC, and DRAC, the
Task Sequence Editor displays the hardware component sequences.
How Do I Import System Information?
Computer Association
A computer association organizes the migration of user state and settings
from a reference computer to a destination system. The reference system is
an existing system that is managed by Configuration Manager 2007 SP1.
This system contains your system’s state and settings that will be migrated.
These settings are migrated to a specified destination system.
RAC Configuration
(RAC 4)
<Create
configuration
file>
For a similar example for the BIOS
option, see "<Create configuration
file>."
<Import
configuration
file>
For a similar example for the BIOS
option, see "<Import configuration
file>".
rac4cfg.ini Use the existing raccfg.ini file to
configure DRAC 4. See "Edit
<syscfg.ini>" for a similar example.
RAC Configuration
(RAC 5)
<Create
configuration
file>
See "<Create configuration file>" to see
how you do it for the BIOS option.
<Import
configuration
file>
See "<Import configuration file>" for
the BIOS option.
rac5cfg.ini Use the existing raccfg.ini file to
configure DRAC 5. See "Edit
<syscfg.ini>" for a similar example.
NOTE: Use RAC configuration (RAC5) to
configure Integrated Dell Remote Access
Controller (iDRAC) on Dell PowerEdge xx0x
blade systems.
Table 5-1. Options And Suboptions In Configuration Action Type Menu (continued)
Option Suboptions Description
book.book Page 34 Thursday, February 5, 2009 5:20 PM