Owner's Manual

Using The Dell Deployment Pack 25
<Create configuration file>
1 Select <Create configuration file> from the Configuration file /
Command line parameters
drop-down menu.
Click
Create .
The
Array Builder wizard displays.
2 Enter the configuration rule name in the Configuration Rule Name field.
3 Select the error handling rule from the drop-down menu. You can choose
from:
•
Fail the task if any controller does not match a configuration rule -
reports a failure if any of the detected controllers cannot be configured
by a rule.
•
Fail the task only if the first controller does not match a
configuration rule
- reports a failure if the first controller detected
(usually the embedded controller) cannot be configured by a rule.
•
Fail the task if none of the array controllers match a configuration
rule
- reports a failure only if all of the controllers in the system fail to
match a rule; in other words, none of the controllers are configured.
<Import configuration file>
1 Select <Import configuration file> from the Configuration file /
Command line parameters
drop-down menu.
Click
Import .
2 Specify the location of the configuration file you want to import and click
Open .
<sample.xml>
1 Select <sample.xml> from the Configuration file / Command line
parameters
drop-down menu.
2 Click View .
The
Array Builder wizard for the sample.xml displays.
3 To edit the sample.xml , see " <Create configuration file>" .
book.book Page 25 Thursday, February 5, 2009 5:20 PM