Owner's Manual

24 Using The Dell Deployment Pack
<Import configuration file>
The Import button displays.
1
Click Import to import an existing .ini file.
Edit <syscfg.ini>
This is a sample BIOS .ini file.
The View button displays.
1
Click View to see the existing syscfg.ini file.
2 In the Configuration File Editor window, you can edit the syscfg.ini file,
select the
Save these changes to the existing file in the toolkit package
when I click OK
option and click OK .
Once you have created the .ini file using any of the options listed above,
click Apply in the Task Sequence Editor window. The task sequence for
Set BIOS Config (ini file) is created.
Configuring RAID Using RAID Config (wizard)
The RAID Config (wizard) allows you to either create a new configuration
file or import an existing configuration to configure RAID on your systems.
Now, let us say you want to configure RAID by creating a new configuration
file using the RAID Config (wizard). From the left hand side of the Task
Sequence Editor, under Configure Hardware
→ Step 1, click Set RAID
Config (wizard).
Under Configuration file / Command line parameters there are three
options you can choose from:
• <Create configuration file>
• <Import configuration file>
• <sample.xml>
book.book Page 24 Thursday, February 5, 2009 5:20 PM