Owner's Manual

800, 830, 840, 850, 860, 1850, 1855, 2800, 2850, 6800, 6850, 1900,
1950, 1955, 2900, 2970, 6950, SC1435, 2950, T105, R200, R900, R805,
M600, M605, T605, R300, T300, M805, M905, R905, R610, R710,
T610,R410, T410, T710, M610, T710 and M710.
The Dell Server Deployment Pack 1.1 supports the following Dell
PowerVault(TM) systems:
0100, 0500, 0600, NX1950 and DL2000.
======================================================================
SUPPORTED OPERATING SYSTEMS
======================================================================
Site Server Operating Systems:
* Microsoft Windows Server(R) 2003 x86, x64 Edition SP2 and SP2 R2
* Microsoft Windows Server(R) 2008 Standard and Enterprise Editions
(x86) and (x64)
Admin Console Operating Systems:
* Microsoft Windows Server 2003 x86, x64 Enterprise Edition
* Microsoft Windows Server 2008 x86, x64 Enterprise Edition
* Microsoft Windows XP(R) SP2 x86
* Microsoft Windows Vista(R) Business Edition x86
* Microsoft Windows XP(R) SP3 X86
* Microsoft Windows Vista(R) Business SP1 x86
======================================================================
INSTALLATION/UNINSTALLATION PREREQUISITES
======================================================================
Before installing Dell Server Deployment Pack components, ensure that:
* you have the Dell Server Deployment Pack Microsoft Windows
Installer (MSI) package file
* you have ConfigMgr 2007 SP1 or ConfigMgr 2007 R2 installed
Note: New features of ConfigMgr 2007 R2 is not supported in DSDP.
* the version of default “boot image” present in the installed
ConfigMgr package is “6.0.6001.18000.”.
Note: This release will not support the WinPE 3.0 boot image
* ConfigMgr is not running during DDP installation and uninstallation
Note: After you confirm, DSDP will close ConfigMgr during
installation.
* Ensure that the compatibility mode is set to 90 (SQL server 2005) if