User`s guide

Managing Your Remote Console Switch 69
3 If no changes were detected in the appliance, a completion dialog box appears with this
information.
-or-
If server changes were detected, then the Detected Changes dialog box will be displayed.
Click Next to update the database.
4 If a cascade switch was detected, the Enter Tiered Switch Information dialog box appears.
Select the type of switch connected to the appliance from the drop-down list. If the type
you are looking for is not available, you can add it by clicking the Add button. For more
information, see “Viewing and Configuring Tiered Switch Connections” on page 70.
5 Click Next. The completion dialog box appears.
6 Click Finish to exit.
Modifying a Server Name
The Modify button in the Servers dialog allows you to rename a selected server. The dialog box
allows you to change a server name from a remote workstation rather than from the OSCAR of
the Remote Console Switch.
To modify a device name:
1 In the Server category, click to select the server whose name you wish to change.
2 Click Modify. The Name Modify dialog is displayed.
Figure 4-10. Name Modify Dialog Box
3
Type the name you want to assign to the server.
4 Click OK. The name you have supplied is updated in both the remote console switch and
local client database.