User`s guide

62 Managing Your Remote Console Switch
www.dell.com | support.dell.com
a Click the Access Rights button to select individual servers for that user. The User
Access Rights dialog box appears.
Figure 4-5. User Access Rights Dialog Box
b
Select a server in the left column for which this user should have access rights. Click
Add.
c Select a server in the right column from which you wish to remove the user’s access
rights. Click the Remove button.
d Repeat steps a and b until the right column represents the appropriate server access for
this user, and then click OK.
5 Click OK to save the settings and return to the main MP window.
To change the user password:
1 Select the Users category in the left column in the MP.
2 Select one user from the list and click the Modify button. The Modify User dialog
appears.
3 Type the password for that user in the Password box and then repeat the password in the
Verify Password box. The password must be between 5 and 16 characters long and contain
both alpha and numeric characters of both upper and lower case.
4 Click OK to return to the MP.
5 Click Apply or OK to send the updated password to the appliance.
To delete a use r:
1 Click the Users category in the left column of the MP and then select the user(s) you wish
to delete.
2 Click the Delete button on the right side of the MP Users window. A confirmation window
appears.
3 Click Yes to confirm the deletion.
-or-
Click No to exit the window without deleting the user.