Deployment Guide

3. Set the Fingerprint Scan sensitivity.
Lower sensitivity increases the acceptable variance and the probability of accepting a false scan. At the highest setting, the system
may reject legitimate fingerprints. The More sensitivity setting lowers the false acceptance rate to 1 in 10,000 scan.
4. To remove all fingerprint scans and credential enrollments from the fingerprint reader's buffer, click Clear Reader. This removes only
data that you are currently adding. It does not delete scans and enrollments stored from previous sessions.
5. To save the settings, click Apply.
Configure One-time Password Authentication
To use the One-time Password feature, the user generates a One-time Password with the Security Tools Mobile application on his mobile
device then enters the password on the computer. The password can be used only once, and it is valid for only a limited length of time.
To further improve security, the administrator can ensure that the mobile application is secure by requiring a password.
On the Mobile Device page, you can configure settings that further increase the security of the mobile device and One-time Password.
To configure One-time Password authentication:
1. In the left pane, under Authentication, select Mobile Device.
2. To require the user to enter a password to access the Security Tools Mobile application on the mobile device, select Require
Password.
NOTE:
Enabling the Require Password policy after mobile devices have been enrolled with a computer causes all
mobile devices to be unenrolled. Users will be required to re-enroll their mobile devices once this policy is enabled.
When the Require Password check box is selected, users must unlock their mobile device to access the Security Tools Mobile app. If
a device lock is not present on the mobile device, the password will be required.
28
Configuration Tasks for Administrators