Administrator Guide

12 Security Tools for Android Administrator Guide
A five-character alphanumeric mobile code displays on the mobile device.
On the Dell tablet
1 Tap t h e DDP|ST Mobile Pairing icon.
A status message displays,
No device paired .
NOTE: If a message displays that One-time Password is disabled, check with your Administrator whether it can be enabled.
2 At the bottom of the screen, tap Enroll Device .
3 Enter a unique identifier for the mobile device, for example, MySmartphone. Later, if you forget your tablet password,
the tablet lists this name to remind you which mobile device to use to recover access to the tablet through a one-time
password.
4 In the tablet’s Mobile Code field, enter the five-character alphanumeric mobile code from the mobile
device/smartphone.
5 Ta p Next . A pairing code displays.
On the mobile device or smartphone
1 At the bottom, tap Pair Devices .
2 Ta p Manual Entry .
NOTE: Currently, Scan QR Code is not available for the tablet.
3 Type the pairing code that displays on the Dell tablet. You do not need to type spaces.
4 Ta p Done .
5 Ta p Pair Devices.
A 6- to 10-digit numeric verification code displays.
On the Dell tablet
1 Ta p Next .
2 Tap the Verification Code field, and type the verification code displayed on the mobile device/smartphone.
This 6- to 10-digit numeric code verifies tha
t the two devices have been paired.
NOTE: If you exceed the maximum number of retries to enter the correct code, you must restart the pairing process.
3 Ta p Submit .
In the Status field, the name of the paired mobile device displays.
On the mobile device or smartphone
1 Ta p Next .
A dialog prompts you to be sure you have completed enrollment.
2 Ta p Continue .
A green checkmark and message confirm enrollment.
3 Tap the Edit icon to enter a descriptive name for your tablet.
4 Ta p Finish .