Setup Guide

Next Generation KeySecure (k170v)
41 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
13. Click Upload New Certificate.
Note—A green check mark is displayed after uploading the new certificate.
a. Click Update.
b. Restart the KMIP service to apply the configuration changes.
c. Click Services  Restart KMIP.
Restart the KMIP service on Gemalto
4.2.3 Create a user that represents the iDRAC on the Next Generation KeySecure
1. Click Users  Create New User.
Create iDRAC user on the next generation KeySecure
Note—The username must match the Common Name field in the iDRAC CSR.