Users Guide
Table Of Contents
- Operating the Monitor
- Operating your monitor
- About your monitor
- Setting up the monitor
- Operating your monitor
- OSD warning messages
- Troubleshooting
- Self-test
- Built-in diagnostics
- Common problems
- Product-specific problems
- Monitor specifications
- Flat panel specifications
- Resolution specifications
- Supported video modes
- FreeSync Graphic Card Support List
- Preset display modes
- Electrical specifications
- Physical characteristics
- Environmental characteristics
- Pin assignments
- Appendix
About your monitor | 7
WARNING: If provided with a 3-pin attachment plug on the power cord, plug
the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord
grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an
important safety feature.
Please confirm the distribution system in building installation shall provide the circuit
breaker rated 120/240V, 20A (maximum).
Identifying parts and controls
Front View
Front panel controls
1 2
Label Description
1 Function buttons (For more information, see Operating your monitor)
2 Power on/off button (with power-status light).
Solid white light indicates the monitor is turned on and functioning normally.
Blinking white light indicates the monitor is in Standby Mode.
NOTE: For displays with glossy bezels the user should consider the placement of the
display as the bezel may cause disturbing reflections from surrounding light and bright
surfaces.