Users Guide

Troubleshooting | 41
Electrical specifications
Model SE2417HGX
Video input signals
∞
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75
ohm input impedance
∞
HDMI 1.4, 600mV for each differential line,
100 ohm input impedance per differential pair
AC input voltage/frequency/
current
100 VAC to 240 VAC / 50 Hz or 60 Hz
±
3 Hz /
1.6A (typical)
Inrush current
∞
120 V: 30 A (Max.) at 0°C (cold start)
∞
240 V: 60 A (Max.) at 0°C (cold start)
Power Consumption 0.1 W (Off Mode)
1
0.1 W (Standby Mode)
1
14.4 W (On Mode)
1
25.0 W (Max)
2
14.0 W (Pon)
3
44.0 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon : Power consumption of On Mode measured with reference to Energy Star test
method.
TEC: Total energy consumption in kWh measured with reference to Energy Star test
method.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical tolerances or otherwise. No
warranty as to accuracy or completeness
is expressed or implied.
Physical characteristics
Model SE2417HGX
Signal cable type
∞
Digital: detachable, HDMI, 19 pins.
∞
Analog: detachable, D-Sub, 15 pins
Dimensions (with stand)
Height 422.50 mm (16.63 in)
Width 555.20 mm (21.86 in)
Depth 179.90 mm (7.08 in)