Users Guide
Table Of Contents
- Operating the Monitor
- Operating your monitor
- About your monitor
- Setting up the monitor
- Operating your monitor
- OSD warning messages
- Troubleshooting
- Self-test
- Built-in diagnostics
- Common problems
- Product-specific problems
- Monitor specifications
- Flat panel specifications
- Resolution specifications
- Supported video modes
- FreeSync Graphic Card Support List
- Preset display modes
- Electrical specifications
- Physical characteristics
- Environmental characteristics
- Pin assignments
- Appendix
Setting up the monitor | 11
Setting up the monitor
Connecting the stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: The following steps are applicable for connecting the stand that shipped with
your monitor. For setting up any other stand, see the documentation that shipped with
it.
To attach the monitor stand:
1.
Place the monitor on a soft cloth or cushion.
2.
Insert the tabs on the upper part of the stand in to the grooves on the back of the
monitor.
3.
Press the stand down until it snaps into place.
2
3