User's Manual

Events and Messages 75
0x00ba Caution Enclosure %s is unstable
0x00bb Caution Enclosure %s hardware error
0x00bc Caution Enclosure %s not responding
0x00bd Info SAS/SATA mixing not supported in enclosure; PD %s
disabled
0x00be Info Enclosure (SES) hotplug on %s was detected, but is not
supported
0x00bf Info Clustering enabled
0x00c0 Info Clustering disabled
0x00c1 Info PD too small to be used for auto-rebuild on %s
0x00c2 Info BBU enabled; changing WT virtual disks to WB
0x00c3 Warning BBU disabled; changing WB virtual disks to WT
0x00c4 Warning Bad block table on PD %s is 80% full
0x00c5 Fatal Bad block table on PD %s is full; unable to log block %lx
0x00c6 Info Consistency Check Aborted due to ownership loss on %s
0x00c7 Info Background Initialization (BGI) Aborted Due to Ownership
Loss on %s
0x00c8 Caution Battery/charger problems detected; SOH Bad
0x00c9 Warning Single-bit ECC error: ECAR=%x, ELOG=%x, (%s);
warning threshold exceeded
0x00ca Caution Single-bit ECC error: ECAR=%x, ELOG=%x, (%s); critical
threshold exceeded
0x00cb Caution Single-bit ECC error: ECAR=%x, ELOG=%x, (%s); further
reporting disabled
0x00cc Caution Enclosure %s Power supply %d switched off
0x00cd Info Enclosure %s Power supply %d switched on
0x00ce Caution Enclosure %s Power supply %d cable removed
0x00cf Info Enclosure %s Power supply %d cable inserted
0x00d0 Info Enclosure %s Fan %d returned to normal
Table A-2. Event Messages (continued)
Number Type Event Text