User's Manual

Events and Messages 69
0x001c Info Flush rate changed to %d seconds
0x001d Info Hibernate command received from host
0x001e Info Event log cleared
0x001f Info Event log wrapped
0x0020 Dead Multi-bit ECC error: ECAR=%x, ELOG=%x, (%s)
0x0021 Warning Single-bit ECC error: ECAR=%x, ELOG=%x, (%s)
0x0022 Dead Not enough controller memory
0x0028 Info Rebuild rate changed to %d%%
0x0029 Info Reconstruction rate changed to %d%%
0x002a Info Shutdown command received from host
0x002c Info Time established as %s; (%d seconds since power on)
0x002d Info User entered firmware debugger
0x002e Warning Background Initialization aborted on %s
0x002f Warning Background Initialization corrected medium error (%s at %lx
0x0030 Info Background Initialization completed on %s
0x0031 Fatal Background Initialization completed with uncorrectable
errors on %s
0x0032 Fatal Background Initialization detected uncorrectable double
medium errors (%s at %lx on %s)
0x0033 Caution Background Initialization failed on %s
0x0034 Progress Background Initialization progress on %s is %s
0x0035 Info Background Initialization started on %s
0x0036 Info Policy change on %s from %s to %s
0x0038 Warning Consistency Check aborted on %s
0x0039 Warning Consistency Check corrected medium error (%s at %lx
0x003a Info Consistency Check done on %s
0x003b Info Consistency Check done with corrections on %s
Table A-2. Event Messages (continued)
Number Type Event Text