User's Manual

62 Troubleshooting
Guided
Configuration
Failed!
Dell SAS RAID Storage
Manager could not proceed
with guided configuration.
This might occur because
the underlying hardware
resources were changed
during the configuration: for
example, a drive was
removed.
Close the Configuration Wizard and
then retry.
Cannot read
Foreign Config!
An error occurred while Dell
SAS RAID Storage Manager
was attempting to read a
Foreign Configuration. Dell
SAS RAID Storage Manager
is unable to read the
configuration.
Move the configuration back to the
system where it came from and
verify the configuration there.
No Foreign
Configuration is
found!
Dell SAS RAID Storage
Manager found a data
inconsistency while reading
a foreign configuration. The
foreign configuration is
invalid.
Scan the system again to attempt to
read the foreign configuration. If
this fails, the configuration might be
corrupted.
Operation cannot
be started while
reconstruction is
in progress!
You tried to start another
operation in Dell SAS RAID
Storage Manager while a
reconstruction was running.
Wait for the reconstruction
operation to complete and then
retry the operation.
Guided
Configuration
failed!
Dell SAS RAID Storage
Manager could not proceed
with guided configuration.
This might occur because
the underlying hardware
resources were changed
during the configuration: for
example, a drive was
removed.
Close the Configuration Wizard and
then retry it.
Table 7-2. Dell SAS RAID Storage Manager Messages (continued)
Message Meaning Action