User's Manual

Configuration 41
3 In the right panel, select the Operations tab and select Delete Virtual
Disk
.
4 Click Go .
5 When the warning message appears, click the check box to confirm that
you are certain that you want to delete the virtual disk, and then click
Yes
to confirm that you want to delete the virtual disk.
NOTE: You will be asked twice if you want to delete a virtual disk to avoid deleting
the virtual disk by mistake.
Saving a Storage Configuration to Disk
You can save an existing controller configuration to a file so you can apply it
to another controller. To save a configuration file, follow these steps:
1
Select a controller icon in the left panel of the Dell SAS RAID Storage
Manager window.
2 On the menu bar, select Operations-> Configuration-> Save
Configuration
to file .
The Save dialog box appears.
3 In the Save dialog box, type a name for the configuration file, or accept the
default name (
hostname .cfg).
4 Click Save to save the configuration file.
Clearing a Storage Configuration from a
Controller
You must clear a storage configuration from a controller before you can create
a new configuration on the controller or load a previously saved configuration
file.
NOTICE: Before you clear a configuration, be sure to save any data that you want
to keep! Clearing a configuration deletes all data from the disks of the existing
configuration.
To clear a configuration from a controller, follow these steps:
1
Select a controller icon in the left panel of the Dell SAS RAID Storage
Manager window.