Users Guide
Table Of Contents
- Contents
- Overview
- Deployment readiness checklist
- Configuring the SharePoint server settings
- Configuring the application
- Using the application
- Troubleshooting
- Application error
- Cannot connect to the SharePoint server
- Cannot authenticate user
- Cannot access My Site
- Cannot access or find a site on the list
- Make sure that the application settings match the SharePoint server settings
- Make sure that you have access to the SharePoint server and have proper site permission
- Make sure that the SharePoint URL is properly mapped to the public URL
- Make sure that all subsites are listed in the site collection
- Contact your sales representative
- Cannot print documents
- Domain controller and device clocks are out of sync
- Notices
- Index
Exporting or importing a configuration file
1 Open a Web browser, and then type the printer IP address.
Note: Locate the IP address on the printer home screen.
2 Click Settings or Configuration.
3 Depending on your printer model, do one of the following:
• Click Apps > Apps Management.
• Click Device Solutions > Solutions (eSF).
• Click Embedded Solutions.
4 Select the application from the list, and then click Configure.
5 Export or import the configuration file.
Notes:
• Profiles created using version 3.0.x or earlier are not supported in version 4.0.x of the application.
• If a JVM Out of Memory error occurs, then repeat the export process until the
configuration
file
is
saved.
• If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click Apply.
Configuring the application 11