Dell S3219D User’s Guide Monitor Model: S3219D Regulatory Model: S3219Dc
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Contents About your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package contents . . . . . . . . . . . . . . . . . . . . . . 5 Product features . . . . . . . . . . . . . . . . . . . . . . 7 Identifying features and controls . . . . . . . . . . . . . . 8 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back view . . . . . . . . . . . . . . . . . . . . .
Organizing cables . . . . . . . . . . . . . . . . . . . . . 23 Removing the stand . . . . . . . . . . . . . . . . . . . . 24 Wall Mounting (Optional) . . . . . . . . . . . . . . . . . 26 Operating your monitor . . . . . . . . . . . . . . . . . . . . . . 27 Power on the monitor . . . . . . . . . . . . . . . . . . . .27 Using the front panel controls . . . . . . . . . . . . . . . 28 OSD controls . . . . . . .
About your monitor Package contents Your monitor ships with the components shown in the table. Ensure that you have received all the components and see Contacting Dell if anything is missing. NOTE: To set up with any other stand, see the documentation that shipped with the stand. Monitor (with VESA cover attached) Stand riser Stand base Power cable (varies by countries) HDMI 1.
USB 3.
Product features The Dell S3219D monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features include: ∞∞ 81.28 cm (32 inch) viewable area display (measured diagonally). 2560 x 1440 resolution, plus full-screen support for lower resolutions. ∞∞ Dell monitors with selectable adaptive sync option (AMD FreeSync or No Sync), high refresh rates and a rapid response time of 5 ms. ∞∞ Digital connectivity with DisplayPort and HDMI.
Identifying features and controls Front view 1 2 Label Description Use 1 Function buttons To access the OSD menu and change the settings if required. (For more information, see Using the front panel controls) 2 Power On/Off button To turn the monitor On and Off.
Back view 2 DELL DELL S3219D Flat Panel Monitor Model: S3219Dc Input Ra ng :100-240V Made in China 50/60Hz,1.5A S3219D Flat Panel Monitor /Monitor Plano Panel /Moniteur écran plat /⏢Ღ亟⽪ಘ Model No. /Modelo /N°de modelo /ර㲏: S3219Dc Input Ra ng /Entrade /Daya Tegangan:100-240V 50/60Hz,1.5A 䕨ޕ䴫Ⓚ Ӕ⍱䴫༃100-240Կ⢩,1.5ᆹษ,50/60䎛㥢 CAN ICES-3 (B)/NMB-3(B) сделанный в Китай /Fabriqué en Chine /ѣു㼳䙖 www.dell.com/regulatory_compliance This device complies with part 15 of the FCC Rules.
Side view Bottom view without monitor stand 1 2 3 4 5 6 7 8 Bottom view without monitor stand Label Description Use 1 Power connector To connect the power cable (shipped with your monitor). 2 Security-lock slot Secure your monitor using a security lock (purchased separately) to prevent unauthorized movement of your monitor. 3 HDMI port To connect your computer through a HDMI cable. 4 DisplayPort 1.2 To connect your computer through a DisplayPort cable.
7 USB downstream Connect your USB peripherals such as storage devices port and printers. NOTE: To use this port, you must connect the USB cable (shipped with your monitor) from the USB-upstream port on the monitor and to your computer. 8 USB BC1.2 charging port Connect to charge your USB device.
Monitor specifications Model S3219D Screen type Active matrix-TFT LCD Panel type Wide Angle VA Viewable image Diagonal 812.80 mm (32 in.) Horizontal, Active Area 708.48 mm (27.89 in.) Vertical, Active Area 398.52 mm (15.69 in.) Area 2823.43 cm2 (437.59 in.2) Refresh rate (Native) 2560 x 1440 at 60 Hz (HDMI/DP) Pixel pitch 0.
Bezel width (edge of monitor to active area) 14.0 mm (Top) 13.9 mm (Left/Right) 17.
Preset display modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal / Vertical) VESA, 720 x 400 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 768 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1600 x 1200 VESA, 1680 x 1050 VESA, 1920 x 1080 VESA, 1920 x 1200 31.5 31.5 37.5 37.9 46.9 48.4 60.0 67.5 47.8 64.0 79.9 75.0 65.3 67.5 74.6 70.1 59.9 75.0 60.3 75.0 60.0 75.
Physical characteristics Model S3219D Signal cable type Digital: detachable, HDMI, 19 pins Front-frame gloss (Minimum) Black frame 85 gloss units Dimensions (with stand) Height 523.2 mm (20.60 in.) Width 737.9 mm (29.05 in.) Depth 197.7 mm (7.78 in.) Dimensions (without stand) Height 436.3 mm (17.18 in.) Width 737.9 mm (29.05 in.) Depth 47.3 mm (1.86 in.) Stand dimensions Height 195.5 mm (7.70 in.) Width 257.3 mm (10.13 in.) Depth 197.7 mm (7.78 in.) Weight Weight with packaging 14.
Environmental characteristics Model S3219D Temperature Operating 0°C to 40°C (32°F to 104°F) Non-operating ∞∞ Storage: -20°C to 60°C (-4°F to 140°F) ∞∞ Shipping: -20°C to 60°C (-4°F to 140°F) Humidity Operating 10% to 80% (non-condensing) Non-operating ∞∞ Storage 5% to 90% (non-condensing) ∞∞ Shipping 5% to 90% (non-condensing) Altitude Operating (maximum) 5,000 m (16,400 ft) Non-operating (maximum) 12,192 m (40,000 ft) Thermal dissipation ∞∞ 273.04 BTU/hour (maximum) ∞∞ 136.
Power management modes If you have VESA's DPM compliance graphic cards or software installed on your computer, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature.
Dell P2418HZ Dell 32 Monitor ? No HDMI 1 signal from your device. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button again to select the correct input source. S3219D Activate the computer and the monitor to gain access to the OSD. NOTE: This monitor is ENERGY STAR certified.
Plug and play capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic, you can select different settings if desired. For more information about changing the monitor settings, see Operating your monitor.
Setting up the monitor Connecting the stand NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: The following procedure is applicable for the stand that shipped with your monitor. If you are connecting a third-party stand, see the documentation that shipped with the stand. To attach the monitor stand: 1. Follow the instructions on the flaps of carton to remove the stand from the top cushion that secures it. 2.
5. Place the monitor upright.
Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. It is recommend to route the cables through the cable-management slot before you connect them to the monitor. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect the HDMI or DisplayPort cable from your monitor to the computer. Connecting the HDMI 1.4 and USB 3.
Organizing cables Use the cable-management slot to route the cables connected to your monitor. HDMI 2.0 HDMI 2.0 HDMI 2.0 HDMI 2.
Removing the stand NOTE: To prevent scratches on the screen when removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: The following procedure is applicable only for the stand that shipped with your monitor. If you are connecting a third-party stand, see the documentation that shipped with the stand. To remove the stand: 1. Place the monitor on a soft cloth or cushion along the desk. 2. Tilt the stand downwards to access to the release button.
3. Use a long screwdriver to press on the release button. 4. While pressing on the release button, pull the stand out.
Wall Mounting (Optional) Refer to the instructions that come with the VESA-compatible base mounting kit. (Screw dimension: M4 x 10 mm) 1. Place the monitor panel on a soft cloth or cushion on a stable flat table. 2. Remove the stand. 3. Remove the VESA cover. 4. Use a screwdriver to remove the four screws securing the plastic cover. 5. Attach the mounting bracket from the wall mounting kit to the LCD. 6. Mount the LCD on the wall by following the instructions that came with the base mounting kit.
Operating your monitor Power on the monitor Press the button to turn on the monitor.
Using the front panel controls Use the control buttons at the bottom edge of the monitor to adjust the image being displayed. 1 3 2 4 5 1 2 3 4 5 Control buttons The following table describes the control buttons: Control Buttons Description Use this button to choose from a list of preset modes. 1 Preset Modes Use the buttons to adjust the volume. Minimum is ‘0’ (-). Maximum is ‘100’ (+).
OSD controls Use the buttons on the bottom of the monitor to adjust the image settings. 1 2 34 Control Buttons 1 Description Use the Up button to increase values or move up in a menu. Up 2 Use the Down button to decrease values or move down in a menu. Down 3 Use the OK button to confirm your selection in a menu. OK 4 Use the Back button to go back to the previous menu.
Using the on-screen display (OSD) menu Accessing the OSD menu NOTE: Any changes you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to automatically close. 1. Press the button to display the OSD main menu. Main Menu for HDMI input Dell 32 Monitor Brightness/Contrast Input Source 75% Color 75% Display Audio Menu Personalize Others and buttons to move between the setting options. As you 2.
Icon Menu and Submenus Brightness/ Contrast Description Use this menu to control the brightness/contrast settings. Dell 32 Monitor Brightness/Contrast Input Source 75% Color Display 75% Audio Menu Personalize Others Brightness Brightness adjusts the luminance of the backlight. Press the button to increase the brightness and press the button to decrease the brightness (min. 0 / max. 100). NOTE: Manual adjustment of brightness is disabled when dynamic contrast is switched on.
Input Source Use the input source menu to select between the different video signals that may be connected to your monitor. Dell 32 Monitor Brightness/Contrast DP Input Source HDMI 1 Color HDMI 2 Display Auto Select Audio Reset Input Source On Menu Personalize Others DP Select DP input when you are using the DP connector. HDMI 1 Push to select the DP input source. Select HDMI 1 input when you are using the HDMI 1 HDMI 2 connector. Push to select the HDMI 1 input source.
Color Use color to adjust the color setting mode. Dell 32 Monitor Brightness/Contrast Preset Modes Standard Input Source Input Color Format RGB Color Reset Color Display Audio Menu Personalize Others Preset Modes When you select preset modes, you can choose Standard, ComfortView, Movie, Game, Warm, Cool or Custom Color from the list. ∞∞ Standard: Loads the monitor's default color settings. This is the default preset mode.
Input Color Format Allows you to set the video input mode to: ∞∞ RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable. ∞∞ YPbPr: Select this option if your DVD player supports only YPbPr output. Dell 32 Monitor Brightness/Contrast Preset Modes Input Source Input Color Format RGB Color Reset Color YPbPr Display Audio Menu Personalize Others Hue This feature can shift the color of the video image to green or purple.
Display Use the display to adjust image. Dell 32 Monitor Brightness/Contrast Aspect Ratio Input Source Sharpness Color Dynamic Contrast Display Response Time Audio Reset Display Wide 16:9 50 Normal Menu Personalize Others Aspect Ratio Adjusts the image ratio to Wide 16:9, Auto Resize, 4:3 or 5:4. Sharpness This feature can make the image look sharper or softer. Use Dynamic Contrast or to adjust the sharpness from 0 to 100.
Audio Dell 32 Monitor Brightness/Contrast Volume Input Source Speaker Enable Color MaxxAudio On Display Reset Audio 50 Audio Menu Personalize Others Volume Use the buttons to adjust the volume. Minimum is ‘0’ (-). Maximum is ‘100’ (+). Speaker To enable or disable speaker function. MaxxAudio MaxxAudio is a suite of advanced audio enhancement tools. This item is to define the action which is used to On/Off MaxxAudio. Reset Audio Select this option to restore default audio settings.
Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen and so on. Dell 32 Monitor Brightness/Contrast Language English Input Source Transparency 20 Color Timer 20 s Display Reset Menu Audio Menu Personalize Others Language Transparency Language options set the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese).
Personalize Users can choose a feature from Shortcut key 1, Shortcut key 2, Power Button LED or Reset Personalization, Preset Modes or Volume and set it as a shortcut key.
Others Dell 32 Monitor Brightness/Contrast Display Info Input Source DDC/CI Color LCD Conditioning Display Firmware Audio Service Tag Menu Reset Others Personalize Factory Reset On Off 00H000 6C70WBU Others Display Info Press to display the information about the display.
LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. To start LCD conditioning, select Off. Dell 32 Monitor Brightness/Contrast Display Info Input Source DDC/CI Color LCD Conditioning On Display Firmware Off Audio Service Tag Menu Reset Others Personalize Factory Reset Others Firmware Display the version of the firmware about the display. Service Tag Display the service tag number of the display.
OSD warning messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. Dell 32 Monitor To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? Yes No S3219D Before the DDC/CI function is disabled, the following message is displayed: Dell 32 Monitor The function of adjusting display setting using PC application will be disabled.
If HDMI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 4 minutes if left at this state. Dell P2418HZ Dell 32 Monitor ? No HDMI 1 Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/S3219D S3219D Dell P2418HZ Dell 32 Monitor ? No HDMI 2 Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/S3219D S3219D If DP cable is not connected, a floating dialog box as shown below appears.
Setting up your monitor Setting the maximum resolution To set the maximum resolution for the monitor: In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the Dropdown list of the Screen Resolution and select 2560 x 1440. 4. Click OK. If you do not see 2560 x 1440 as an option, you may need to update your graphics driver.
If you have a non Dell desktop, portable computer, or graphics card In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Personalization. 3. Click Change Display Settings. 4. Click Advanced Settings. 5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel, and so on). 6.
Using tilt NOTE: The stand is not attached when the monitor is shipped from the factory.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor.
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. 1 2 3 4 5 To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2.
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms Possible Solutions No Video/Power LED off ∞∞ Ensure that the video cable connecting the monitor and the computer is properly connected and secure. ∞∞ Verify that the power outlet is functioning properly using any other electrical equipment. ∞∞ Ensure that the power button is pressed.
Stuck-on Pixels ∞∞ Cycle power On-Off. ∞∞ Pixel that is permanently off is a natural defect that can occur in LCD technology. ∞∞ For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/support/monitors. Brightness Problems ∞∞ Reset the monitor to Factory Settings (Factory Reset). ∞∞ Adjust brightness & contrast controls via OSD. Geometric Distortion ∞∞ Reset the monitor to Factory Settings (Factory Reset). ∞∞ Adjust horizontal & vertical controls via OSD.
Wrong Color ∞∞ Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application. ∞∞ Try different Preset Modes in Color settings OSD. Adjust R/G/B value in Custom Color in Color settings OSD. ∞∞ Change the Input Color Format to RGB or YPbPr in the Color settings OSD. ∞∞ Run the built-in diagnostics.
Product-specific problems Specific Symptoms Possible Solutions Screen image is too ∞∞ Check the Aspect Ratio setting in the Display settings small OSD. ∞∞ Reset the monitor to Factory Settings (Factory Reset). Cannot adjust the ∞∞ Turn Off the monitor, unplug the power cord, plug it back, monitor with the and then turn On the monitor. buttons on the ∞∞ Check if the OSD menu is locked. If yes, press and hold bottom of the panel the menu button for 10 seconds to unlock. (For more information, see Lock).
Appendix Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety Environment and Regulatory Information (SERI). FCC notices (U.S. Only) and other regulatory information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance.
Pin assignments HDMI connector Pin number 1 Monitor side of the 19-pin side signal cable TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2- 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1- 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 Reserved (N.C.
DP connector Pin number 20-pin side of the connected signal cable 1 ML0 (p) 2 GND 3 ML0 (n) 4 ML1 (p) 5 GND 6 ML1 (n) 7 ML2 (p) 8 GND 9 ML2 (n) 10 ML3 (p) 11 GND 12 ML3 (n) 13 GND 14 GND 15 AUX (p) 16 GND 17 AUX (n) 18 GND 19 Re-PWR 20 +3.
Universal serial bus (USB) interface This section gives you information about the USB ports that are available on the monitor. NOTE: This monitor is Super-Speed USB 3.0 and High-Speed USB 2.0 compatible. Transfer Speed Super-speed Data Rate 5 Gbps Power Consumption* 4.5 W (Max, each port) High speed 480 Mbps 4.5 W (Max, each port) Full speed 12 Mbps 4.5 W (Max, each port) Transfer Speed High speed Data Rate 480 Mbps Power Consumption* 2.5 W (Max, each port) Full speed 12 Mbps 2.
USB 3.0 downstream connector Pin Number 1 9-pin Side of the Connector VCC 2 D- 3 D+ 4 GND 5 SSRX- 6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ .