Users Guide

412 Using the Server Address Book and Server Phone Book
Setting LDAP Server
NOTE: When SSL/TLS communication is required to access the LDAP server, enter a check in the Enable check box for LDAP-
SSL/TLS Communication in SSL/TLS under the Security tab. For more information, see "SSL/TLS."
1 Select Print Server Settings , click the Security tab, and then select LDAP Server .
2 In the IP Address/Host Name & Port text box under Server Information , enter IP address or the host name, and
the port number. The port number must be 389, 636, 3268, 3269, or between 5000 and 65535.
NOTE: When LDAPS communication is required, set the port number to 636, and when you use the global catalog, set the
port number to 3269.
3 Under Optional information , set the following items.
For details on configuring each item, consult your network administrator.
a In the Search Directory Root text box, enter the search directory root.
b In Login Credentials to Access LDAP Server , select credential used to access the LDAP server.
Select
None to use anonymous login. Make sure that the LDAP server accepts anonymous login.
Select
Preset to apply the preset login credentials to each user.
Select
Prompt User to prompt the users to enter their login credentials.
c In the L ogin Name text box, enter the login name.
b
f
a
c
d
g
h
i
e