Users Guide

Dell™ Printer Configuration Web Tool 149
Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE: The print quality changes depending on the setting values you select for this item.
Va lu e s:
Adjust Density
Purpose:
To adjust the density level.
Va lu e s:
Chart
Purpose:
To print various charts that can be used for diagnosis of the printer.
Va lu e s:
Plain(60-80g/m
2
) Sets the temperature settings for the fusing unit for plain paper within the range of -3 to 3.
Plain Thick(81-
105g/m
2
)
Sets the temperature settings for the fusing unit for thick plain paper within the range of -3 to 3.
Covers(106-163 g/m
2
) Sets the temperature settings for the fusing unit for cover paper within the range of -3 to 3.
Covers Thick
(164-216 g/m
2
)
Sets the temperature settings for the fusing unit for thick cover paper within the range of -3 to 3.
Rough Surface Sets the temperature settings for the fusing unit for rough surface paper within the range of -3 to 3.
Label Sets the temperature settings for the fusing unit for labels within the range of -3 to 3.
Envelope Sets the temperature settings for the fusing unit for envelopes within the range of -3 to 3.
Japanese Postcard Sets the temperature settings for the fusing unit for Japanese postcards within the range of -3 to 3.
Darker3
Darker2
Darker1
Adjusts the density level darker than the normal setting.
Normal Works well with standard typed or printed documents.
Lighter1
Lighter2
Lighter3
Adjusts the density level lighter than the normal setting.
Pitch Chart Print Prints a full halftone page. Also prints a page to check the pitch. A total of two
pages are printed.
Full Page Solid Print Prints a chart of the full page solid.
1-Sided Prints a chart on one side of the paper.
2-Sided Prints a chart of the full page solid on both sides of the paper.
Alignment Chart Print Prints a chart to check for proper alignment of the print image on the paper.