Install Guide

CACStar™ Installation v3 Dell S2815dn Page 4
Plug the power “Y” cable into the back of the printer. Plug the thin USB
power cable from the CACStar into the USB charger that is plugged into
the remaining Y of the power cable. This USB cable is for power only. It
has no data connection. Plug the printer’s power cable from the wall
into the remaining end of the Y cable.
Turn on the S2815. Refer to the CACStar User’s Guide for
configuration.
Note: In some cases there may be a European power cable for the
printer included in the CACStar box. If you are a US customer and do
not need this cable, it may be discarded.