User Manual

48 | Troubleshooting
iii Try to adjust the volume level Up and Down. Go to the Link Volume Controls
Setting.
iv Observe if the abnormal noise will change along side with the volume level.
v Check if the speaker is properly seated on the monitor stand .
C Symptom:
- Low sound output level
Troubleshooting Guide:
1 Audio source volume level is high. Go to the Link Volume Controls Setting.
i Press the Volume + button to increase the volume.
D Symptom:
- Unbalanced sound from the speakers
Troubleshooting Guide:
Check the computer Volume Balance setting by doing the following steps:
Volume Controls Setting.
i Right Click the speaker icon.
ii Select Playback devices.
iii Right Click Default Playback devices and select Properties.
iv Select Levels and click Balance. The L and R value must be the same.