Dell S2415H User’s Guide Model: S2415H Regulatory model: S2415Hb
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ____________________ Copyright © 2014-2019 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Contents 1 About Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . .5 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Identifying Parts and Controls . . . . . . . . . . . . . . . . . . . . . 8 Monitor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Plug and Play Capability . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 FCC Notices (U.S. Only) and Other Regulatory Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Setting Up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . .
About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and Contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
Cable Cover Power Cable (Varies by Country) Power Adapter HDMI Cable • Quick Setup Guide • Safety, Environmental, and Regulatory Information 6 | About Your Monitor
Product Features The Dell S2415H flat panel monitor has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), and Light Emitting Diode (LED) backlight. The monitor features include: • 60.47 cm (23.8-inch) viewable area display (measured diagonally). 1920 x 1080 resolution with full-screen support for lower resolutions. • Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side. • Mega Dynamic Contrast Ratio (8,000,000:1).
Identifying Parts and Controls Front View Front Panel Controls Label 8 Description 1 Function buttons (For more information, see Operating the Monitor) 2 Power On/Off button (with LED indicator) | About Your Monitor
Back View Back View with Monitor Stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA cover) Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm). 2 Regulatory label Lists the regulatory approvals. 3 Stand release button Releases stand from monitor. 4 Security lock slot Secures monitor with security lock (security lock not included). 5 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
Side View Label Description 1 Headphone port Use Connect a headphone. Bottom View Bottom View without Monitor Stand Description Label 10 Use 1 Power adapter port Connect the power adapter. 2 HDMI (MHL) port Connect your computer with HDMI cable or MHL devices with MHL cable (optional). 3 VGA port Connect your computer with VGA cable (optional). 4 Audio Line-In port Connect to your computer audio output (optional).
Monitor Specifications Flat Panel Specifications Model S2415H Screen type Active matrix - TFT LCD Panel type In Plane Switching (IPS) Viewable image Diagonal 604.70 mm (23.8 inches) Horizontal, Active Area 527.04 mm (20.75 inches) Vertical, Active Area 296.46 mm (11.67 inches) Area 156246.28 mm2 (242.18 inch2) Pixel pitch 0.2745 mm x 0.
Supported Video Modes Model S2415H Video display capabilities (VGA & HDMI playback) 480i, 480p, 576i, 576p, 720p, 1080i, 1080p Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/ Vertical) VESA, 720 x 400 31.5 70.1 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.
MHL Source Display Modes Display Mode Frequency (Hz) 640 x 480p 60 720 x 480p 60 720 x 576p 50 1280 x 720p 60 1280 x 720p 50 1920 x 1080i 60 1920 x 1080i 50 1920 x 1080p 30 1920 x 1080p 60 1920 x 1080p 50 720 (1440) x 480i 60 720 (1440) x 576i 50 Electrical Specifications Model S2415H Video input signals Synchronization input signals AC/DC adapter* • Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance • HDMI 1.4 (MHL 2.
Brand Manufacturer Model Dell Delta DA65NM111-00 Dell Chicony HA65NS5-00 Polarity Speaker Specifications S2415H Model Speaker rated power 2x3W Frequency Response 200 Hz - 20 kHz Impedance 4 ohm Physical Characteristics Model S2415H Connector type 15-pin D-subminiature (Blue connector); HDMI (MHL); Audio-In; Headphone-Out Signal cable type • Digital: detachable, HDMI, 19 pins • Digital: detachable, MHL, 19 pins Dimensions (with stand) Height 404.6 mm (15.93 inches) Width 539.
Weight without stand assembly (For wall mount or VESA mount considerations no cables) 3.24 kg (7.14 lb) Weight of stand assembly 1.01 kg (2.
Energy Star Power Consumption Pon 16.7 W ETEC 52.5 kWh The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed: or * Zero power consumption in OFF mode can only be achieved by disconnecting the power adapter from the monitor. ** Maximum power consumption with maximum luminance. Activate the computer and the monitor to gain access to the OSD. NOTE: This monitor is ENERGY STAR certified.
Pin Assignments VGA Connector Pin Number 15-pin Side of the Connected Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5 V/3.
HDMI Connector Pin Number 18 19-pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C.
MHL Connector Pin Number 19-pin Side of the Connected Signal Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 GND 6 TMDS DATA 1- 7 MHL+ 8 TMDS DATA 0 SHIELD 9 MHL- 10 TMDS CLOCK+ 11 GND 12 TMDS CLOCK- 13 CEC 14 Reserved (N.C. on device) 15 DDC CLOCK (SCL) 16 DDC DATA (SDA) 17 GND 18 VBUS (+5V, 900mA maximum) 19 CBUS Plug and Play Capability You can install the monitor in any Plug and Play-compatible system.
LCD Monitor Quality and Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: http://www.dell.com/support/monitors. Maintenance Guidelines Cleaning Your Monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
Setting Up the Monitor Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. WARNING: Place monitor of a flat, clean, and soft surface to avoid scratching the display panel. 1 2 Assemble the stand riser to stand base. a Attach the stand riser to the stand base.
Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. To connect your monitor to the computer: 1 Turn Off your computer and disconnect the power cable. 2 Connect the VGA/HDMI/audio cable from your monitor to the computer.
Using the Mobile-High Definition Link (MHL) NOTE: This monitor is MHL certified. NOTE: To use the MHL function, use only MHL certified cable and source devices that support MHL output. NOTE: Some MHL source devices may take more than a few seconds or longer to output an image, depending on MHL source devices. NOTE: When the connected MHL source device enters Standby mode, the monitor displays a black screen or the message below, depending on MHL source device's output.
Organizing Your Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) organize all cables as shown above. Attaching the Cable Cover NOTE: The cable cover is detached when the monitor is shipped from the factory. 1 Insert the two tabs on the bottom part of the cable cover in the slots on the back of the monitor. 2 Press the cable cover till it snaps into place.
Removing the Monitor Stand CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. To remove the stand: 1 Place the monitor on a soft cloth or cushion. 2 Press and hold the stand-release button. 3 Lift the stand up and away from the monitor.
Wall Mounting (Optional) NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit. Refer to the instructions that come with the VESA-compatible wall mounting kit. 1 Place the monitor panel on a soft cloth or cushion on a stable, flat table. 2 Remove the stand. 3 Use a Phillips crosshead screwdriver to remove the four screws securing the plastic cover. 4 Attach the mounting bracket from the wall mounting kit to the monitor.
Operating the Monitor Power On the Monitor Press the button to turn On the monitor. Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change. The following table describes the front panel buttons: Front Panel Button 1 Description Use this button to choose from a list of preset color modes.
2 Use this button to directly access the Volume level bar. Shortcut key/ Volume 3 Use the MENU button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the Menu System. Menu 4 Use this button to go back to the main menu or exit the OSD main menu. Exit Front Panel Button Use the buttons on the front of the monitor to adjust the image settings. Front Panel Button 1 Description Use the Up button to adjust (increase ranges) items in the OSD menu.
Using the On-Screen Display (OSD) Menu Accessing the Menu System NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear. 1 Press the button to launch the OSD menu and display the main menu.
2 Use and to move between the options in the menu. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor. 3 Use to activate the highlighted option. 4 Use and 5 Use to enter the slide bar and then use and indicators on the menu, to make your changes. 6 Select Icon to select the desired parameter. , according to the to return to the main menu.
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup. Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display menu. NOTE: In most cases, Auto Adjust produces the best image for your configuration.
Color Use the Color menu to adjust the color setting mode. Input Color Allows you to set the video input mode to: Format RGB: Select this option if your monitor is connected to a computer (or DVD player) using the HDMI cable; or MHL devices using the MHL cable. YPbPr: Select this option if your monitor is connected to a DVD player by YPbPr using HDMI cable; or MHL devices by YPbPr using the MHL cable. Or if the DVD (or MHL devices) color output setting is not RGB.
Preset Modes When you select Preset Modes, you can choose Standard, Multimedia, Movie, Game, Paper, Warm, Cool, or Custom Color from the list. • Standard: Loads the monitor's default color settings. This is the default preset mode. • Multimedia: Loads color settings ideal for multimedia applications. • Movie: Loads color settings ideal for movies. • Game: Loads color settings ideal for most gaming applications. • Paper: Loads brightness and sharpness settings ideal for viewing text.
Reset Color Reset your monitor’s color settings to the factory settings. Settings Display Use the Display menu to adjust image. Aspect Ratio Adjusts the image ratio to Wide 16:9, 4:3, or 5:4. or to adjust the image left or right. Horizontal Use Position Minimum is '0' (-). Maximum is '100' (+). Vertical Position Use or to adjust the image up or down. Minimum is '0' (-). Maximum is '100' (+). NOTE: Horizontal Position and Vertical Position adjustments are only available for "VGA" input.
Reset Display Settings Select this option to restore default display settings. Audio Volume Allows you to set the volume level of audio source. Use Audio Source or to adjust the volume level from '0' to '100'. Allows you to set the audio source to PC Audio or HDMI (MHL). NOTE: Audio Source option is only available when you are using the HDMI (MHL) connector. Reset Audio Select this option to restore default audio settings.
Energy Power Button Allows you to set the power LED indicator On or Off to save energy. LED Reset Energy Select this option to restore default Energy settings. Settings Menu 36 | Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.
Language Language options set the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified Chinese, or Japanese). Transparency Select this option to change the menu transparency by using and (min. 0 / max. 100). Timer OSD Hold Time: sets the length of time the OSD will remain active after the last time you pressed a button. or Use 60 seconds. Lock to adjust the slider in 1 second increments, from 5 to Controls user access to adjustments.
Others DDC/CI DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance, and etc.) to be adjustable via the software on your computer. You can disable this feature by selecting Disable. Enable this feature for best user experience and optimum performance of your monitor.
Helps reduce minor cases of image retention. Depending on the LCD Conditioning degree of image retention, the program may take some time to run. You can enable this feature by selecting Enable. Reset Other Reset all settings under the Others menu to the factory preset values. Settings Factory Reset Reset all settings to the factory preset values. NOTE: This monitor has a built-in feature to automatically calibrate the brightness to compensate for LED aging.
When the monitor does not support a particular resolution mode, you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
VGA/HDMI (MHL) input or If either VGA or HDMI (MHL) input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. or See Troubleshooting for more information.
Setting the Maximum Resolution To set the maximum resolution for the monitor: In Windows® 7, Windows® 8, and Windows® 8.1: 1 For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Screen Resolution. 3 Click the Dropdown list of the Screen Resolution and select 1920 x 1080. 4 Click OK. In Windows® 10: 1 Right-click on the desktop and click Display settings. 2 Click Advanced display settings.
Using Tilt NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt With the stand attached to the monitor, you can tilt the monitor for the most comfortable viewing angle. NOTE: The stand is detached when the monitor is shipped from the factory.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer.
4 This box also appears during normal system operation, if the video cable becomes disconnected or damaged. 5 Turn Off your monitor and reconnect the video cable; then turn On both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.
Common Problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms What You Experience Possible Solutions No Video/Power No picture LED off • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment. • Ensure that the power button is depressed fully.
Geometric Distortion Screen not centered correctly • Reset the monitor to factory settings. • Auto Adjust via OSD. • Adjust horizontal & vertical controls via OSD. NOTE: When using HDMI input, the positioning adjustments are not available. Horizontal/ Vertical Lines Screen has one or more lines • • • • Reset the monitor to factory settings. Perform Auto Adjust via OSD. Adjust Phase and Pixel Clock controls via OSD.
Image retention from a static image left on the monitor for a long period of time Faint shadow from the static image displayed appears on the screen • Use the Power Management feature to turn off the monitor at all times when not in use (for more information, see Power Management Modes). • Alternatively, use a dynamically changing screensaver.
Mobile High-Definition Link (MHL) Specific Problems Specific Symptoms MHL interface is not working What You Experience Can not see MHL device image shown on the monitor Possible Solutions • • • • Ensure your MHL cable and MHL device are MHL certified. Check your MHL device is turned On. Check your MHL device is not in Standby mode. Check physical MHL cable connection is corresponding to input source selected on OSD Menu: HDMI (MHL).
Appendix WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI). FCC Notices (U.S. Only) and Other Regulatory Information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.
Setting Up Your Monitor Setting the display resolution For maximum display performance with Microsoft® Windows® operating systems, set the display resolution to 1920 x 1080 pixels by performing the following steps: In Windows® 7, Windows® 8, and Windows® 8.1: 1 For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to classic desktop. 2 Right-click on the desktop and click Screen Resolution. 3 Click the Dropdown list of the Screen Resolution and select 1920 x 1080. 4 Click OK.
6 Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com). 7 After installing the drivers for your graphics adapter, attempt to set the resolution to 1920 x 1080 again. In Windows® 10: 1 Right-click on the desktop and click Display settings. 2 Click Advanced display settings. 3 Click the dropdown list of Resolution and select 1920 x 1080. 4 Identify your graphics controller supplier from the description at the top of the window (e.
