User Guide

28 | Operating Your Monitor
OSD Warning Messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
To allow manual adjustment of brightness, the Dynamic Contrast will be
No
Yes
switched off.
Do you want to continue?
Dell 23 Monitor
S2319H
When the monitor does not support a particular resolution mode, the following
message is displayed:
The current input timing is not supported by the monitor display.
Please change your input timing to
1920x1080, 60Hz or any
other monitor listed timing as per the monitor specifications.
Dell 23 Monitor
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor Specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled:
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell 23 Monitor
S2319H
No
When the monitor enters the Power Save Mode, the following message appears:
Entering Power Save Mode.
Dell 23 Monitor
S2319H
If you press any button other than the power button, the following messages will
appear depending on the selected input: