User Guide

28 | Operating Your Monitor
OSD Warning Messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
Dell S2X16H
To allow manual adjustment of brightness, the Dynamic Contrast will be
No
Yes
switched off.
Do you want to continue?
When the monitor does not support a particular resolution mode, the following
message is displayed:
Dell S2X16H
The current input timing is not supported by the monitor display. Please
change your input timing to
1920x1080, 60Hz or any other monitor
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor Specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled:
Dell S2X16H
The function of adjusting display setting using PC application will be
No
Yes
disabled.
Do you wish to disable DDC/CI function?