Owners Manual

If you close the Dell Repository Manager while a job is still being processed in the Jobs Queue, the

Processing Jobs window displays the following message:

You have one job being processed.

Would you like to Stop processing and Exit now?

Job names of the jobs which are in processing state is displayed under the Jobs Queue.

• Click Cancel to close the window and allow the job to finish processing.

• Click Stop and Exit to exit the application without completing the jobs in the Jobs Queue.

NOTE: You can select multiple jobs together and remove them from the Jobs Queue. The Remove

option prompts you to reconfirm the removal of the job. Are you sure you want to

permanently remove the selected Job(s)? window appears for confirmation. If, the job is

already completed, removing the job will not remove the work that is completed, it will only remove

the job listed in the jobs queue.

Jobs Queue Details

1. Select the job from the Jobs Queue, and click Details to view the Job Execution Details.

2. Click Report tab to view the Job Details.

The Job Details window displays the information on the Job Name, Repository, Job Status, Job

Result, Download Path, and the information on the Files failed to download.

3. Click Log to view the timing details.

4. Click Close.

Updating A Local Repository

1. In the Dell Repository Manager window, click My Repositories tab, select a local repository, which is

located on the system, and click Open.

2. Click Run a comparison on the top of the Dell Repository Manager screen.

The Update Repository window is displayed.

3. On the Update Repository screen, the Destination Repository box displays the name of the

repository open at the time Run a comparison was selected. The Source Repository box defaults to

Source. However, any existing repository can be selected from the drop-down menu in this box.

Click Compare.

The Comparing Repositories window is displayed with the progress bar while Setting up

comparison result.... The Comparison Summary: window is displayed.

NOTE: Newer Versions, Changed Files andObsolete Files screens provide further details on

DUPs that can be installed to update the repository. You can see a list of the DUPs once you

select any system from the System Filter or Device Filter.

4. You can select All or any specific DUP to update that local repository from the Newer Versions,

Changed Filesand Obsolete Files.

NOTE: By default, the Show report after update. check box is marked at the bottom of the

Update Repository window. You can uncheck this box if you do not want to see the report

after every update.

5. Click Update.

The Comparing Repositories window appears with the progress bar while Updating Base repository

components.... The Update Report window is displayed.