User`s guide

Installationxxx | xxx21
NOTE: If you changed the default HTTP/HTTPS ports in the serial console and are
using an IPv4 address, use IP address format: https://<ipaddress>:<port#>, where
“port#” is the number you specified in the serial console. If you are using an IPv6
address, use format: https://[<ipaddress>]:<port#>, where “port#” is the number you
specified in the serial console. If you are using an IPv6 address, you must encl ose the
address in square brackets.
2 The log in window opens. Type your username and password and click OK.
NOTE: The default usernam e is Admin and the password has no entry.
3 The web interface opens and displays the Connections tab.
NOTE: To use the Web interface, Java Runtime Environment (JRE) version 1.6.0_11 or
hi gher must be installed on your computer. The KVM Switch will attempt to detect
Java on your PC. If Java is not installed, download i t from http://www.java.com, then
associate the JNLP fil e with Java WebStart.
NOTE: Once you have l ogged in to the web interface, you will not have to log in again
w hen launching new sessions unless you have logged out or your session has exceed
the i nactivity timeout specified by the administrator.