Owner's Manual

26 Configuring RACs Using Microsoft Active Directory
3 Filter the RACs that are configured to a standard schema, extended
schema, or RACs that have AD schema disabled and configure the filtered
RACs to a new extended schema. To do this:
a Under Filter on Schema , select one of the following options to filter
the RACs that you want to configure:
• Standard Schema
• Extended Schema
•Active Directory disable
When you select a filter type, the corresponding RAC IP addresses are
selected from the list. You can also select individual RAC IP addresses
from the list.
b Under New Schema , select Extended Schema and click Next . The
Common Settings window is displayed. The settings provided in this
window are common for both standard and extended schema.
4 In the Common Settings window, enter the following:
a Under Upload Active Directory CA certificate , click Browse and
select the CA certificate file to be uploaded.
NOTE: This is optional for iDRAC6, but mandatory for DRAC 4, DRAC 5, and CMC.
The AD CA certificate on the RAC must be the same certificate that is on the AD
server.
b If you have selected the IP addresses for iDRAC6, click the iDRAC6
tab and enter the AD settings. For information about the settings, see
Dell Remote Access Configuration Tool Online Help .
c If you have selected IP addresses for DRAC4, DRAC5, or CMC, click
the
DRAC4 / DRAC5 / CMC tab and enter the AD settings. For
information about the settings, see
Dell Remote Access Configuration
Tool Online Help
.
5 Click Next . The Extended Schema Settings window is displayed.