Owner's Manual
Configuring RACs Using Microsoft Active Directory 25
Creating RAC objects and Configuring RACs
Using AD Extended Schema
Dell™ has extended the AD schema to include an association, device, and
privilege property. The association property is used to link together the users
or groups with a specific set of privileges to one or more RAC devices.
For each physical RAC on the network that you need to integrate with the
AD server for authentication and authorization, it must have at least one
association object and one RAC device object.
You need specify the AD server login credentials to:
• Connect to the AD server and create the RAC device objects in the AD
server.
• Connect to the AD server and set an association object and a privilege
object for each RAC.
You can have multiple association objects, and each association object can be
linked to as many users, groups of users, or RAC device objects as required.
The users and RAC device objects can be members of any domain in the
enterprise. However, each association object can be linked (or, may link users,
groups of users, or RAC device objects) to only one privilege object.
For extended schema configuration, depending on the RAC type, the
respective extended schema objects must be assigned. For example, the old
extended schema objects are assigned to DRAC 4, DRAC 5, and CMC and
the new extended schema objects are assigned to iDRAC6. For more
information on extended schema, see the appropriate RAC user guide listed
in "Other Documents You May Need."
To create RAC objects and configure RACs using extended schema based AD
settings:
1 Discover and verify the RAC IP addresses on your network.
For more
information, see "Discovering, Importing, and Verifying RACs."
2
In the
Firmware Update Configuration
window, click
Next
. The
Active
Directory Configuration
window is displayed.
The
Schema
column indicates that the RAC is configured to a standard or
extended schema. If it is not configured, the
Schema
column displays
Disabled
.