Owner's Manual

24 Configuring RACs Using Microsoft Active Directory
7 Click Apply . The Summary window displays the following information for
the selected RACs:
–RAC IP address
– DNS name
–RAC Type
–Firmware version
– Status information
– Status bar
If the configuration is successful, the
Status column displays the following
messages for each IP address:
a Configuring - RAC configuration is in-progress.
b Uploading CA certificate - This message is displayed only if you have
enabled CA certificate validation.
c Configuration Success - RAC configuration is successful.
If the configuration is not successful, the
Status column displays one of
the following messages for the IP address:
• Configuration Failed - RAC configuration is not successful.
• Insufficient Privileges - The required privileges are not provided to
configure the RAC.
For more information on the
Status column messages, see
"Troubleshooting and Frequently Asked Questions."
8 After all the configurations are completed, the message "Done" is
displayed. Click
OK . The standard schema settings are configured for the
selected RAC IP addresses.