Technical Guide

Table 36. 8 x 2.5-inch SAS/SATA and 4x3.5-inch and No BP storage configuration
Dell EMC PowerEdge Server
Standard Operating Support
(ASHRAE A2 compliant) All
options supported unless
otherwise noted.
Dell EMC PowerEdge Server
Extended Inletient 40 ° C Operating Support
(ASHRAE A3 compliant)
Dell EMC PowerEdge Server
Extended Inletient 45 ° C
Operating Support (ASHRAE
A4 compliant)
○ Samsung PM1733
Capacities > 7.68 TB
○ Kioxia CM6 all capacities
○ Kioxia PM6 SAS all
capacities
Table 37. 10 x 2.5-inch SAS/SATA storage configuration
Dell EMC PowerEdge Server
Standard Operating Support
(ASHRAE A2 compliant) All options
supported
Dell EMC PowerEdge Server
Extended Inletient 40 ° C Operating
Support (ASHRAE A3 compliant)
Dell EMC PowerEdge Server
Extended Inletient 45 ° C Operating
Support (ASHRAE A4 compliant)
● HPR Gold Fan is required for
Processor TDP >165 W
● HPR Gold Fan is required for with
RM configuration
● 10 x 2.5-inch SAS/SATA config
Processor TDP >220 W SM only
support 6 x 2.5-inch SAS/SATA at
HDD#0~ HDD#5 and SM Blank x 2
are required at HDD#6 ~HDD#9
● With RM Config do not support
Processor TDP >220 W
● The Following OCP3.0 NIC only
support optic cable with thermal
Spec 85C and power <=1.2 W
○ Broadcom Thor QP 25G SFP28
○ Solarflare Medford2 DP 25GbE
SFP28 in both configuration
● The Following PCIe NIC only support
optic cable with thermal Spec 85C
and power <=2.5 W
○ Channel Devices Intel
Columbiaville DP 100GbE
● The following NVMe /SAS/SATA
could not be support in Rear Module
○ Samsung PM1735 Capacities >
6.4 TB
○ Samsung PM1733 Capacities >
7.68 TB
○ Kioxia CM6 all capacities
○ Kioxia PM6 SAS all capacities
● Not support Processor TDP > 16 5W
● Not support BOSS M.2 Module
● Not support Non-Dell qualified
peripheral cards and Channel devices
(FW) cards
● Not support NIC consuming power
>= 25 W. Ex: CX6 card
● Not Support Config with RM
● Not support OCP transfer rate >25G
or cooling tier > 10
●
Optic Cable with spec 85C is
required
● Two PSUs are required. System
performance may be reduced in the
event of a PSU failure
A4 environment not Support
Table 38. 10 x 2.5-inch NVMe and 8 x 2.5-inch NVMe storage configuration
Dell EMC PowerEdge Server
Standard Operating Support
(ASHRAE A2 compliant)
All options supported unless
otherwise noted.
Dell EMC PowerEdge Server
Extended Inletient 40 ° C Operating
Support (ASHRAE A3 compliant)
Dell EMC PowerEdge Server
Extended Inletient 45 ° C Operating
Support (ASHRAE A4 compliant)
● HPR Gold Fan is required
● 10 x 2.5-inch NVMe config Processor
TDP >220 W SM only support 4x2.5
● Not support BOSS M.2 Module ● Not support BOSS M.2 Module
56 Appendix A: Additional specifications